Plans

Resources

How Poor Environmental Control Creates Pest Pressure 

Disclaimer: This article originally appeared in the April 2022 issue of Cannabis Science & Technology. Too much moisture in the air, on plant leaves and buds or around the roots is the most common...

19 04 2022
InSpire is Heading East for the New England Cannabis Convention

Later this month, InSpire is heading to Boston for the New England Cannabis Convention, home base of the East Coast cannabis industry. Now in its eighth year, the New England...

09 03 2022
How Does Carbon Dioxide Enrichment Affect Environmental Control?

Disclaimer: This article originally appeared in the January/February 2022 issue of Cannabis Science & Technology. It is all too common to refer to soil nutrients as “food” for plants, when the real food plants...

21 02 2022
Let’s Talk Indoor Grow Optimization at RII’s Upcoming Workshop

InSpire is excited to be participating in an upcoming webinar hosted by Resource Innovation Institute and the Tri-County Regional Energy Network. Part of RII’s Efficient Yields workshop series, this free...

25 01 2022
Providing Sufficient Airflow for Plant Growth Environments

Disclaimer: This article originally appeared in the November/December 2021 issue of Cannabis Science & Technology. In nature, plants are typically exposed to bulk movement of massive amounts of air as wind passes through the...

23 12 2021
Dehumidification Solutions: InSpire Featured in Terpenes & Testing Magazine

InSpire’s best in class dehumidification systems for indoor horticulture were recently featured in an article for Terpenes & Testing Magazine. Dehumidification is arguably the most difficult environmental factor to control...

26 10 2021
Check Out Our New Article for Terpenes & Testing Magazine on Drying and Curing Methods

InSpire’s Cannabis Operations Specialist, Anders Peterson, recently authored another article for Terpenes & Testing Magazine. In “How Drying and Curing Methods Can Make or Break Your Harvest,” Anders shares some...

12 10 2021
Does Light Spectrum Alter Plant Transpiration Rates?

Disclaimer: This article originally appeared in the September 2021 issue of Cannabis Science & Technology. In the last couple of decades, plant-growth lighting technologies have become increasingly diverse in the pursuit of increased photosynthetic...

30 09 2021
Cannabis in Atlantic City: InSpire Takes on New Jersey Cannabis Convention

It’s been a busy few months of travel for the InSpire team and our next destination is New Jersey! We’re heading to Atlantic City for NECANN’s New Jersey Cannabis Convention...

24 09 2021
InSpire Visits Detroit for NCIA’s Midwest Cannabis Business Conference

InSpire is excited to be traveling to Detroit for the National Cannabis Industry Association’s annual Midwest Cannabis Business Conference. Later this month, our own Jesse Porter will join the NCIA...

15 09 2021
InSpire Joins RII to Share Insight on Integrated Pest Management for Cannabis Cultivation

Jesse Porter, InSpire’s Cannabis Business Specialist, recently joined Gretchen Schimelpfenig of Resource Innovation Institute and Craig Burn of Desert Aire to write an article on monitoring, identifying, preventing and controlling...

09 09 2021
InSpire is Heading to Vegas for Cannabis Conference 2021

Will we see you in Las Vegas for Cannabis Conference 2021? InSpire’s Cannabis Business Specialist, Jesse Porter, will be in attendance and speaking on a panel hosted by our colleagues...

20 08 2021
InSpire Writes for Terpenes & Testing Magazine on Increasing Energy Efficiency in Your Commercial Cannabis Grow Room

Anders Peterson, our Cannabis Operations Specialist here at InSpire, recently authored an article for Terpenes & Testing Magazine on increasing energy efficiency in commercial cannabis cultivation without sacrificing product quality....

19 08 2021
InSpire Talks to MG Magazine About Technological Advancements in the Indoor Cannabis Cultivation Industry

Jesse Porter, InSpire’s Cannabis Business Specialist, was recently interviewed by Christopher Jones for an article in MG Magazine surrounding technological advances in the indoor cannabis cultivation industry. MG Magazine covers...

05 08 2021
InSpire is Heading to Chicago for CannaCon Midwest

https://youtu.be/dSO9g7PFx48 Anders Peterson, our Cannabis Operations Specialist here at InSpire, is excited to be speaking at CannaCon Chicago this August. CannaCon is one of the leading cannabis business conferences bringing...

30 07 2021
Measuring Success: InSpire Explores Important KPIs for Cannabis Cultivators

InSpire’s free webinar series for cannabis cultivators continues with a discussion on the metrics that influence the productivity and financial success of your commercial cannabis cultivation facility. “Measuring Success: Cannabis...

19 07 2021
InSpire to Present at the 2021 ASHRAE Virtual Annual Conference this Month

InSpire is honored to be participating in the 2021 ASHRAE Virtual Annual Conference happening later this month. ASHRAE, the American Society of Heating, Refrigerating and Air-Conditioning Engineers, is an organization...

15 06 2021
InSpire’s Webinar Series Returns with an In-Depth Discussion on Cannabis Phenotypes

We are excited to announce the return of our free webinar series designed specifically for cannabis cultivators. Our next webinar, “Getting The Most Out Of Your Cannabis Phenotype,” will take...

18 05 2021
A Deep Dive into Vapor Pressure Deficit for Commercial Cannabis Cultivation

Disclaimer: This article originally appeared in the May 2021 issue of Cannabis Science & Technology. Authors: Robbie Batts, InSpire Transpiration Solutions and Samuel Burgner, PhD Candidate, McGill University Vapor pressure deficit is a critical measurement...

12 05 2021
Bringing Automation and Cloud Control to Cannabis Cultivation: Meet InSpire’s Grow Room Environment Controller

As the cannabis industry rapidly grows and evolves, we can safely say that it is no longer in its infancy. The wisdom and technology of the industry's early years has...

28 04 2021



    *Please complete all fields correctly